EN 
EN
ES
PT
AR
FR
RU
ZU
Duonaŭtomata Mezurmaŝino por Bieloj
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
Trajtoj
Alta mezura precizeco
Alta mezura precizeco
High measuring efficiency ≤ 30 sec / piece
Tre redukti laborajn kostojn
Specifoj
Mezura principo: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
Mezura teritorio: Manaj ĝustigoj por diversaj grandecoj.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
