All Categories

Automatyske gauging masines

Thús>Products>Automatyske gauging masines

Semi-automatyske mjitmasine foar Conrods


Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.


Kontakt mei ús opnimme

Features

Hege mjitting presyzje

Hege mjitnogigens

High measuring efficiency ≤ 30 sec / piece

Gâns ferminderje arbeidskosten


Spesifikaasjes

mjitting prinsipe: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.

Meitsje range: Manual adjustments for various sizes measurements.

Measurement takt time: ≤30 seconds, under normal condition and operation

Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.


inquiry