EN 
EN
ES
PT
AR
FR
RU
ZU
Inneal tomhais leth-fèin-ghluasadach airson conrods
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
feartan
Cruinneas tomhais àrd
Cruinneas tomhais àrd
High measuring efficiency ≤ 30 sec / piece
Lùghdaich cosgaisean saothair gu mòr
Sònrachaidhean
Measurement principle: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
Raon tomhais: Atharrachaidhean làimhe airson tomhas de dhiofar mheudan.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
