Dukkan Bayanai

Atomatik Gauging Machines

Gida>Products>Atomatik Gauging Machines

Na'urar auna Semi-atomatik don Conrods

Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.

Tuntube mu


High daidaito daidaici

High ji daidaito

High measuring efficiency ≤ 30 sec / piece

Da gaske rage farashin ma'aikata

bayani dalla-dalla

Measurement principle: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.

Tsarin auna: Manual adjustments for various sizes measurements.

Measurement takt time: ≤30 seconds, under normal condition and operation

Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.