EN 
EN
ES
PT
AR
FR
RU
ZU
Mīkini ana semi-akomi no Conrods
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
hiʻona
Kūpono ana kiʻekiʻe
ʻO ke ana kiʻekiʻe kiʻekiʻe
High measuring efficiency ≤ 30 sec / piece
E hoʻoliʻiliʻi loa i nā kumukūʻai hana
hoakaka
Measurement principle: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
Ka pae ana: Nā hoʻoponopono lima no nā ana ʻokoʻa.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
