EN 
EN
ES
PT
AR
FR
RU
ZU
Semi-automatic Kev Ntsuas Qhov Siv Lub Tshuab Rau Conrods
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
nta
High ntsuas precision
Kev ntsuas ntsuas qhov tseeb
High measuring efficiency ≤ 30 sec / piece
Zoo heev txo cov nqi zog
Specifications
Measurement principle: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
Kev ntsuas ntau: Phau ntawv kev kho kom haum rau ntau qhov ntau thiab tsawg ntsuas.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
