Txhua pawg

Electronic Micrometer

Tsev>cov khoom siv>Electronic Micrometer

MDE-500 Programable Electronic Micrometer


MDE-500 Programable Electronic Micrometer is a precision comparative measuring instrument that electronically magnifies mechanical slight changed value, of which value is displayed by digital or bar graph indication.

It has 2-12 channels spec. and can recognize not only dimension of workpiece, but also profile, position or run out quickly and accurately.

7 inches TFT LCD screen displays measured value. colored OK/NG, and many graphical displays for easy reading and easy operation.


Tiv tauj peb

nta

Extremely high stability

Highly integrated, no external buttons, operation and display integrated on the touch screen

MOE allows processing of measured value capability for various measuring applications.

One-touch master set operation and automatic master setting by panel key or input signals are utilized.

Max. of 12 measuring items are registered, no need to set parameters after selecting items.

Feedback signals can be put out to processing machine by UCL/LCL quality control graphical display

Pre-set counters are ready for count up output of NG repeat, selecting counter, classifies counter, etc.

The detector uses high precision and a good linear differential transformer, so very slight change can be detected with high reliability.

Any size measuring head can be configured

Micrometer can be customized with roundness, minimum, maximum, average measurement

Closed structure with waterproof and oil-proof. Suitable for harsh industrial environments.

10 sets of programs can be set up on site to carry out measurements of various specifications. One-click product switching.

Independent air source control box to ensure that the inside of the instrument is dry and has a longer service life

Micrometer can store 100,000 measurement data, power loss data is not lost

Automatically save with delay and send test data

7 inches TFT LCD screen for easy programming


Specifications

Yam

MDE-500 Programable Electronic Micrometer

Channel

2-12 raws

Number of workpieces

nco ntsoovzed

 max max ua 12*as requested

lag luam

Enable to set up optionally according to measuring requirement like circularity, cylindricity, max/min value, etc.

Kev ntsuas muaj nuj nqi

puab inch, sab nrauv diameter, thickness, highness, taper, straightness, verticality, concentricity, cylindricity, flatness, center distance, parallelism, torsion, bounce, position, fitting gap, airtightness, etc.

One-touch calibration

Easy calibration (magnification or drift control) by one-touch operation start, etc.

NC feedback function

Compensated +/- signal by UCL/LCL quality control graphical display (by repeat counter, with count cancelled function after feedback)

Workpiece counter

Count of number measured

hwj chim 

100 ~ 240V±10% 50/60Hz 11VA

dimension

260mm (W) * 280mm (H) * 200mm (D)

Nyhav

kg

Option

Audible alarm, USB, Air auto shut off, Wireless transmission, QR code with measurements, Statistics operation, Extension of channel, etc.


Performance

Cov khoom

Txuj kev ua yeeb yam

Myooj yim range

5µm

10µm

25µm

50µm

100mm

zaub rkev daws teeb meem

0.1µm

0.2µm

0.5µm

1.0µm

2.0µm

Max. myooj yim kev ua yuam kev

0.2µm

0.4µm

1.0µm

2.0µm

4.0mm

repeatability

0.1µm

0.2µm

0.5µm

1.0µm

2.0mm

Lo lus teb tnpe

Max 1.2s


NCO NTSOOV