EN 
EN
ES
PT
AR
FR
RU
ZU
Poluautomatski mjerni stroj za čaure
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
Značajke
Visoka preciznost mjerenja
Visoka točnost mjerenja
High measuring efficiency ≤ 30 sec / piece
Znatno smanjiti troškove rada
Tehnički podaci
Princip mjerenja: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
Raspon mjerenja: Ručna podešavanja za mjerenja različitih veličina.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
