EN 
EN
ES
PT
AR
FR
RU
ZU
Mesin Pengukur Semi-otomatis untuk Conrods
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
fitur
Presisi pengukuran tinggi
Akurasi pengukuran tinggi
High measuring efficiency ≤ 30 sec / piece
Sangat mengurangi biaya tenaga kerja
spesifikasi
Prinsip pengukuran: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
Jarak pengukuran: Penyesuaian manual untuk berbagai ukuran pengukuran.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
