EN 
EN
ES
PT
AR
FR
RU
ZU
Mita nleba anya
Standard precision 0.005mm
High precision 0.002mm
Fast measurement saves time
Easy to operate, strong versatility
The operating environment requirements are not high, and the multi-point parameters of shaft parts can be accurately measured at the same time
atụmatụ
1.Air filter device
2.Standard precision 0.005mm and high precision 0.002mm
3.Quick measurements save time
4.Easy to operate, strong versatility
5.Easy to move and maintain
6.The operating environment is not high; can be customized according to Particularity of Parts.
nkọwa
| ụdị | Measuring range (mm) | Machine head accuracy | Izi ezi zuru oke | ||||
| Applicable diameter | Applicable length | m | m | ||||
| Single lever phenotype | 3-25 | 102 | 1μm | 5μm | |||
| Single lever phenotype | 10-50 | 152 | 1μm | 5μm | |||
| Single lever phenotype | 20-102 | 203 | 1μm | 5μm | |||
| Double lever phenotype | 3-25 | 102 | 1μm | 5μm | |||
| Double lever phenotype | 10-50 | 152 | 1μm | 5μm | |||
| Double lever phenotype | 20-102 | 203 | 1μm | 5μm | |||
| Scale/Lever Phenotype | 10-50 | 152 | 1μm | 5μm | |||
| Scale/Lever Phenotype | 20-102 | 203 | 1μm | 5μm | |||
| ụdị | Measuring range (mm) | Machine head accuracy | Izi ezi zuru oke | ||||
| Applicable diameter | Applicable length | m | m | ||||
| Single lever phenotype | 3-25 | 102 | 1μm | 2μm | |||
| Single lever phenotype | 10-50 | 152 | 1μm | 2μm | |||
| Single lever phenotype | 20-102 | 203 | 1μm | 2μm | |||
| Double lever phenotype | 3-25 | 102 | 1μm | 2μm | |||
| Double lever phenotype | 10-50 | 152 | 1μm | 2μm | |||
| Double lever phenotype | 20-102 | 203 | 1μm | 2μm | |||
| Scale/Lever Phenotype | 10-50 | 152 | 1μm | 2μm | |||
| Scale/Lever Phenotype | 20-102 | 203 | 1μm | 2μm | |||
