Allir flokkar

Sjálfvirkar mælivélar

Heim>Vörur>Sjálfvirkar mælivélar

Hálfsjálfvirk mælivél fyrir Conrods


Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.


Hafðu samband

Aðstaða

Mikil mælingarnákvæmni

Mikil mælanákvæmni

High measuring efficiency ≤ 30 sec / piece

Lækkaðu mjög launakostnað


upplýsingar

Mælingarregla: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.

Mælissvið: Handvirkar aðlaganir fyrir mismunandi stærðarmælingar.

Measurement takt time: ≤30 seconds, under normal condition and operation

Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.


Fyrirspurn