EN 
EN
ES
PT
AR
FR
RU
ZU
ಕಾನ್ರೋಡ್ಸ್ಗಾಗಿ ಅರೆ-ಸ್ವಯಂಚಾಲಿತ ಅಳತೆ ಯಂತ್ರ
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
ವೈಶಿಷ್ಟ್ಯಗಳು
ಹೆಚ್ಚಿನ ಅಳತೆಯ ನಿಖರತೆ
ಹೆಚ್ಚಿನ ಅಳತೆಯ ನಿಖರತೆ
High measuring efficiency ≤ 30 sec / piece
ಕಾರ್ಮಿಕ ವೆಚ್ಚವನ್ನು ಬಹಳವಾಗಿ ಕಡಿಮೆ ಮಾಡಿ
ವಿಶೇಷಣಗಳು
ಮಾಪನ ತತ್ವ: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
ಮಾಪನ ವ್ಯಾಪ್ತಿ: ವಿವಿಧ ಗಾತ್ರದ ಅಳತೆಗಳಿಗಾಗಿ ಹಸ್ತಚಾಲಿತ ಹೊಂದಾಣಿಕೆಗಳು.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
