Cylindrical Inner Double Flank Gear Rolling Tester

Automatically complete theradial composite deviation Fi", Radial composite deviation fi" and radial runout Fr" of the inner gear, and can detect the outer circular runout or end runout of the inner gear. The original double grating structure can easily and quickly detect thecenter distance movement upper and lower deviation (Eas Eai) and common normalline(W) of the center distance of the teeth. Theory and practice prove that the M and W measured according to the center distance are more in line with the principle and definition, and equipped with perfect measurement control and error compensation processing system, effectively solve the error problem caused by repeated inaccurate positioning and different positioning surfaces of the gear (optional). Can meet and continue to develop new measurement requirements put forward by users.

계측기 측정 항목 및 매개변수

1. 방사형 합성 편차： （Fi〞）；

2. 치아간 반경방향 편차： （fi〞）；

3. 방사 런아웃： （Fr〞）；

4. 공통정규선： （W）;

5. 롤러 간 거리： （M）;

6. Center distance movement upper and lower deviation： （쉽게,아이）;

ⅲ.주요 기술 매개 변수

1. Module of measuredgear ------------------------------------------------------------------ 0.2~2 mm

2. Max.OD of measured gear -------------------------------------------------------------------- 100 mm

3. Double flank center distance-------------------------------------------------------------- 20~90 mm

4.Vertical column travel range------------------------------------------------------------ 200 mm

5.Micromotion measures the movement of the slide frame ------------------------ 20mm

6. 기기 정확도:

GB/T26093-2010 “기어 양면 메쉬 종합 측정기” 표준을 참조하여 제정하였으며, 이에 따라 합격 기준을 시행할 수 있습니다(별표 1 참조).

7. 계측 반복성:

반경 합성 편차 Fi", 이빨 간 반경 편차 fi" 및 반경 흔들림 Fr"(반복성은 0.003mm)

공통 법선 Wk와 롤러 간 거리 M(반복성은 0.005mm)

(각 측정 휠과 작업물은 동일한 이빨에서 시작합니다.)

1.The use of convenient gear installation of the center measuring unit structure layout;

2. 티he use of natural marble as the basis of equipment, natural marble high precision, strong stability, wear resistance, corrosion resistance, not high requirements for temperature conditions

3. 티he software can set the measurement speed, mesh rotation direction;

4. Measuring rhythm 10~60s;

5. 티he use of dual electric system for automatic tooth splitting;

6. The clamping structure of the workpiece adopts high-precision manual three-jaw chuck (Taiwan Thousand Island), which is convenient to clamp and disassemble, and the inner hole and outer diameter of the workpiece positioning benchmark are easy to install and replace ;

7.Using a unique device to measure the installation of eccentric measurement results for error compensation;

8. The traditional method of using the amount block to measure the center distance is eliminated, and the center distance, common normal line and span bar distance are measured automatically by precision motor and grating.

9. 큐기어 버 지점, 범프 위치를 빠르게 확인하고 온라인 유지 관리를 위해 운영자에게 문의하십시오. 측정 범프 오류 인식 범위는 0.01mm보다 큽니다.

10. 티hrough the three-color light display measurement results, and with sound prompt function;

11. Statistic the measurement results;

12. 에이ccording to the use of the site environment for the computer to use dustproof, anti-oil mist chassis and install protective devices at the vent, to ensure the computer life;

13. Strengthen the instrument protective cover to prevent oil from entering the motor and grating to affect the service life;

14. 티he use of our company's mature and unique error floating collection mechanical structure, effectively avoid the workpiece overweight on the measurement results caused by error and misjudgment phenomenon;

15. Special data analysis principle, the planet gear unique data display, double tooth surface can display the detection results, timely monitoring of the processing process;

16. 티he embedded software V2.0 system is equipped with Win7 system under the operation object oriented friendly man-machine software, convenient for future software upgrade and maintenance, with independent intellectual property rights, with software copyright certificate;

17. 에이ccording to the input gear basic parameters (number of teeth, modulus, pressure Angle, displacement coefficient, etc.) automatically calculate the center distance, can automatically and manually select the error amplification ratio;

18. 에이utomatic control instrument measurement action, data acquisition, error compensation, measurement result error evaluation and measurement result output functions;

19. 피roduct replacement time ≤2 minutes;

20. 아르 자형epeated measurement Settings when selecting automatic repeated measurement, if the measurement result is unqualified standard measurement is not separated, the second measurement is automatically carried out. If the second measurement qualified wheel is separated for the next workpiece clamp, if the measurement result is unqualified, the third measurement qualified wheel is automatically separated for the end of the measurement, and the burr point is transferred to the first square wheel to separate the end of the measurement. This reduces the time of repeated clamping with the same gear and improves the efficiency; (The main operation interface can be selected without exiting the software system Settings)

21. 과quipment color dark gray wrinkle 0216 and gray wrinkle RAL7035;

22. 과quipped with industrial computers;

23. Scanning and saving function: equipped with scanning gun, after passing the test, manually identify two-dimensional code, and bind two-dimensional code information and measurement results automatically recorded in Excel table (optional).