Small Module Double Flank Gear Rolling Tester

The product adopts the marble base and the structure of "micro-force parallel slider" as the measuring unit, which makes the operation smooth and flexible.The tested mandrel adopts a universal PIN shaft to facilitate the replacement of the test product, and it can also be customized according to the test product. The product adopts high precision network port communication motion control and error data acquisition system, which can automatically measure theradial composite deviation Fi",Radial composite deviation fi" and radial runout Fr" of the gear at one time.Center distance movement upper and lower deviation (Eas, Eai),The distance across rollers (M) and common normal line (Wk) of gear side backlash were detected in the center distance measurement mode. Quickly confirm the location of gear burr points and bumps, and perform online maintenance to meet and continue to develop new measurement requirements put forward by users.

계측기 측정 항목 및 매개변수

1. 방사형 합성 편차： （Fi〞）；

2. 치아간 반경방향 편차： （fi〞）；

3. 방사 런아웃： （F_r〞）；

4. 공통정규선： （W）;

5. 롤러 간 거리： （M）;

6.Center distance movement upper and lower deviation： （쉽게,아이）;

주요 기술 매개 변수

1.Module of measuredgear --------------------------------------------------- 0.2~2 mm

2.Max.OD of measured gear----------------------------------------------------- 100 mm

3.Double flank center distance------------------------------------------------ 20~90 mm

4. Distance between double flank tips ---------------------------------------70-120mm

5.Micromotion measures the movement of the slide frame------------------ 5 mm

6.Spindle Load----------------------------------------------------------------------------- 2Kg

7.기기 정확도:

GB/T26093-2010 “기어 양면 메쉬 종합 측정기” 표준을 참조하여 제정하였으며, 이에 따라 합격 기준을 시행할 수 있습니다(별표 1 참조).

8.Instrument repeatability:

Radial composite deviation Fi", Tooth-to-tooth radial deviation fi" and radial runout Fr"(repeatability는0.003mm);

The common normal line Wk andthe distance across rollers M(repeatability0.005mm입니다);

(각 측정 휠과 작업물은 동일한 이빨에서 시작합니다.)

1. Adopt the structure layout of the centered measuring unit to avoid bias and facilitate gear installation;

2.The equipment detection movement unit adopts "precision" V-shaped guide rail. Its friction, small clearance, small inertia, smooth and flexible operation is more suitable for the detection of tiny gear.

3.The standard gear shaft and the workpiece gear shaft are made of dense steel ball rolling shafting, low friction resistance, high measurement accuracy (the minimum tool cage can be processed to the inner diameter of 2mm);

4. The equipment meshing micro force measurement breaks the traditional fixed force measurement method, and changes to the adjustable force measurement method according to the measurement accuracy requirements of different products.

5.The software can set the measurement speed, mesh rotation direction, the measurement beat is 2~18S can be adjusted;

6.The use of electric system for automatic tooth splitting;

7.Quickly confirm the gear burr point, bump position, turn to the operator for online maintenance, measurement bump error recognition range is greater than 0.01mm;

8.Through the three-color light display measurement results;

9.The standard gear installation diagram, the inner hole diameter of the standard wheel φ20 (+0.003/0);

10.According to the use of the site environment for the computer to usedust-proof, anti-oil mist chassis and install the ventprotection device to ensure the computer life;

11.계기 보호 커버를 강화하여 오일이 모터 및 그레이팅에 유입되어 서비스 수명에 영향을 미치지 않도록 방지합니다.

12.Disk gear detection;

13.Upgrade to the win10 environment measurement software;