All Categories

Lorem velit Gauging

domus>Products>Lorem velit Gauging

Semi-automatic Apparatus ad Measuring Conrods

Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.

Nobis loquere


Summus praecisione measurement

Measurement altum accuratissime

High measuring efficiency ≤ 30 sec / piece

His magno opere labor costs redigendum


Measurement principle: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.

measurement range: Opera magnitudinum adjustments pro variis mensuras superiores.

Measurement takt time: ≤30 seconds, under normal condition and operation

Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.