EN 
EN
ES
PT
AR
FR
RU
ZU
Хагас автомат хэмжих машин
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
онцлог
Өндөр хэмжилтийн нарийвчлал
Хэмжилтийн өндөр нарийвчлал
High measuring efficiency ≤ 30 sec / piece
Хөдөлмөрийн зардлыг эрс багасгах
үзүүлэлт нь
Measurement principle: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
Хэмжлийн хүрээ: Төрөл бүрийн хэмжилтийн гарын авлагын тохируулга.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
