सर्व श्रेणी

स्वयंचलित गेजिंग मशीन

मुख्यपृष्ठ>उत्पादने>स्वयंचलित गेजिंग मशीन

कॉनरोडसाठी अर्ध-स्वयंचलित मापन यंत्र


Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.


आम्हाला संपर्क करा

वैशिष्ट्ये

उच्च मापन अचूकता

उच्च मापन अचूकता

High measuring efficiency ≤ 30 sec / piece

मोठ्या प्रमाणात कामगार खर्च कमी करा


वैशिष्ट्य

Measurement principle: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.

मापन रेंज: विविध आकारांच्या मोजमापांसाठी व्यक्तिचलित समायोजन.

Measurement takt time: ≤30 seconds, under normal condition and operation

Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.


चौकशीची