EN 
EN
ES
PT
AR
FR
RU
ZU
Semi-automatic Measuring Machine for Conrods
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
Karatteristiċi
Preċiżjoni għolja tal-kejl
Preċiżjoni għolja tal-kejl
High measuring efficiency ≤ 30 sec / piece
Naqqas ħafna l-ispejjeż tax-xogħol
speċifikazzjonijiet
Prinċipju tal-kejl: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
Firxa ta 'kejl: Aġġustamenti manwali għal kejl ta 'daqsijiet varji.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
