सबै श्रेणियाँ

स्वचालित गजिंग मेशिनहरू

होम>उत्पादन>स्वचालित गजिंग मेशिनहरू

Conrods को लागी अर्ध स्वचालित मापन मशीन

Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.

हामीलाई सम्पर्क गर्नुहोस


उच्च मापन परिशुद्धता

उच्च मापन सटीकता

High measuring efficiency ≤ 30 sec / piece

श्रम लागत ठूलो कम


मापन सिद्धान्त: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.

मापन दायरा: विभिन्न आकार मापन को लागि मैन्युअल समायोजन।

Measurement takt time: ≤30 seconds, under normal condition and operation

Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.