EN 
EN
ES
PT
AR
FR
RU
ZU
Poloautomatický merací stroj na ojnice
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
Vlastnosti
Vysoká presnosť merania
Vysoká presnosť merania
High measuring efficiency ≤ 30 sec / piece
Výrazne znížiť náklady na pracovnú silu
technické údaje
Princíp merania: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
Rozsah merania: Ručné úpravy pre merania rôznych veľkostí.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
