All Categories

Mashiinnada Gawaarida otomaatiga ah

Hoyga>Products>Mashiinnada Gawaarida otomaatiga ah

Mashiinka Cabbirka Semi-otomaatigga ah ee Isku-darka

Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.

Nala soo xiriir


Sax cabirka sare

Saxnaanta cabbirka sare

High measuring efficiency ≤ 30 sec / piece

Si weyn u yaree kharashyada shaqaalaha


Measurement principle: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.

kala duwan Cabbiraad: Isku hagaajinta gacanta ee cabbirada cabbirada kala duwan.

Measurement takt time: ≤30 seconds, under normal condition and operation

Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.