Categories All

Jarolla ka ho iketsa gauging mechine

Lehae>Products>Jarolla ka ho iketsa gauging mechine

Seka-jarolla ka ho iketsa lekanya Machine bakeng Conrods


Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.


Iteanye le rona

Likaroloana

Tekanyo e phahameng ea litekanyo

Ho nepahala ha litekanyo tse phahameng

High measuring efficiency ≤ 30 sec / piece

Fokotsa litšenyehelo tsa basebetsi


songolo

Measurement principle: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.

Mealo ea tekanyo: Liphetoho tsa matsoho bakeng sa litekanyo tsa boholo bo fapaneng.

Measurement takt time: ≤30 seconds, under normal condition and operation

Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.


dipatlisiso