sadaya Kategori

Mesin Gauging Otomatis

Imah>produk>Mesin Gauging Otomatis

Mesin Ngukur semi-otomatis pikeun Conrods

Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.

Taros Kami


High measurement precision

High measurement accuracy

High measuring efficiency ≤ 30 sec / piece

Greatly reduce labor costs


Measurement principle: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.

Runtuyan ukuran: Manual adjustments for various sizes measurements.

Measurement takt time: ≤30 seconds, under normal condition and operation

Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.