EN 
EN
ES
PT
AR
FR
RU
ZU
MDE-500 inayoweza kusakinishwa kwa Micrometer ya Elektroniki
MDE-500 Programable Electronic Micrometer is a precision comparative measuring instrument that electronically magnifies mechanical slight changed value, of which value is displayed by digital or bar graph indication.
It has 2-12 channels spec. and can recognize not only dimension of workpiece, but also profile, position or run out quickly and accurately.
7 inches TFT LCD screen displays measured value. colored OK/NG, and many graphical displays for easy reading and easy operation.
Vipengele
Extremely high stability
Highly integrated, no external buttons, operation and display integrated on the touch screen
MDE allows processing of measured value capability for various measuring applications.
One-touch master set operation and automatic master setting by panel key or input signals are utilized.
Max. of 12 measuring items are registered, no need to set parameters after selecting items.
Feedback signals can be put out to processing machine by UCL/LCL quality control graphical display
Pre-set counters are ready for count up output of NG repeat, selecting counter, classifies counter, etc.
The detector uses high precision and a good linear differential transformer, so very slight change can be detected with high reliability.
Any size measuring head can be configured
Micrometer can be customized with roundness, minimum, maximum, average measurement
Closed structure with waterproof and oil-proof. Suitable for harsh industrial environments.
10 sets of programs can be set up on site to carry out measurements of various specifications. One-click product switching.
Independent air source control box to ensure that the inside of the instrument is dry and has a longer service life
Micrometer can store 100,000 measurement data, power loss data is not lost
Automatically save with delay and send test data
7 inches TFT LCD screen for easy programming
Specifications
Item |
MDE-500 inayoweza kusakinishwa kwa Micrometer ya Elektroniki |
channel |
2-12 njia |
|
Number of workpieces memorized |
max. 12*as requested |
operesheni |
Enable to set up optionally according to measuring requirement like circularity, cylindricity, max/min value, etc. |
Kazi ya upimaji |
kipenyo ndani, diamete ya njer, unene, ukuu, taper, straightness, verticality, concentricity, cylindricity, flatness, center distance, parallelism, torsion, bounce, position, fitting gap, airtightness, etc. |
One-touch calibration |
Urekebishaji rahisi (magnification or drift control) by one-touch operation start, etc. |
NC feedback function |
Compensated +/- signal by UCL/LCL quality control graphical display (by repeat counter, with count cancelled function after feedback) |
Workpiece counter |
Count of number measured |
Nguvu |
100 ~ 240V±10% 50 / 60Hz 11VA |
Vipimo |
260mm (W) * 280mm (H) * 200mm (D) |
uzito |
kg |
Chaguo |
Audible alarm, USB, Air auto shut off, Wireless transmission, QR code with measurements, Statistics operation, Extension of channel, etc. |
Utendaji
vitu |
Maonyesho ya Kawaida |
||||
Mkuongeza nguvu rmalaika |
5µm |
10µm |
25µm |
50µm |
100μm |
Kuonyesha razimio |
0.1µm |
0.2µm |
0.5µm |
1.0µm |
2.0µm |
Max. mkuongeza nguvu makosa |
0.2µm |
0.4µm |
1.0µm |
2.0µm |
4.0μm |
Repeatability |
0.1µm |
0.2µm |
0.5µm |
1.0µm |
2.0μm |
Majibu tjina |
Upeo 1.2s |
||||
