EN 
EN
ES
PT
AR
FR
RU
ZU
Semi-awtomatikong Pagsukat ng Makina para sa Conrods
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
Mga tampok
High measurement precision
High measurement accuracy
High measuring efficiency ≤ 30 sec / piece
Greatly reduce labor costs
Mismong
Sukat ng pagsukat: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
Hanay ng pagsukat: Manual adjustments for various sizes measurements.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
