EN 
EN
ES
PT
AR
FR
RU
ZU
Konrods uchun yarim avtomatik o'lchov mashinasi
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
Xususiyatlari
Yuqori o'lchov aniqligi
Yuqori o'lchov aniqligi
High measuring efficiency ≤ 30 sec / piece
Ish haqini sezilarli darajada kamaytiring
Texnik xususiyatlari
Measurement principle: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
O'lchov diapazoni: Har xil o'lchamdagi o'lchovlar uchun qo'lda sozlash.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
