EN 
EN
ES
PT
AR
FR
RU
ZU
Semi-oluzenzekelayo Ukulinganisa Machine for Conrods
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
Iimbonakalo
Ukuchaneka kwemilinganiselo ephezulu
Ukuchaneka kwemilinganiselo ephezulu
High measuring efficiency ≤ 30 sec / piece
Kakhulu ukunciphisa iindleko zomsebenzi
iinkcukacha
Measurement principle: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
Uluhlu lwesilinganiselo: Manual adjustments for various sizes measurements.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
