EN 
EN
ES
PT
AR
FR
RU
ZU
Semi-othomathikhi Ukulinganisa Machine
Semi-automatic Measuring Machine for Conrods can realize the automatic measurements of the following items: bore diameter, roundness and cylindricity; centre-to-centre distance between two bores; curvature, distortion and thickness. SPC analysis of the above measurement data can be conducted.
Izici
Ngokunemba High nesilinganiso
Ukunemba okuphezulu kokulinganisa
High measuring efficiency ≤ 30 sec / piece
Nciphisa kakhulu izindleko zabasebenzi
Imininingwane
Measurement principle: Comparison measurement. Displacement sensor is used to measure the difference between the measured parts and the calibration parts, and then the relative sizes of the measured parts are calculated.
Uhla lokulinganisa: Ukulungiswa mathupha kwezilinganiso ezinobukhulu obuhlukahlukene.
Measurement takt time: ≤30 seconds, under normal condition and operation
Measurement position technology level: sensor resolution: 0.0001mm, measurement accuracy: ±0.001mm, stability accuracy: ±0.001mm/4 h, GR&R: ≤10%.
